Hydraulic hoses for every application

Elastomeric hydraulic hoses excel through their good resistance to oils and ageing and retain their flexibility, even at temperatures down to -40 °C. The advantages of thermoplastic hoses include their low weight, excellent chemical resistance and flexibility. Elastomeric and thermoplastic hoses are extremely resistant to UV radiation and have high impulse load strength.

Two different types of winding are used for the steel reinforcement in the pressure carrier layer. Woven steel wires are used for braided hoses. The braid around the core layer of the hose is formed by weaving the wire alternately in two different directions. With spiral reinforced hoses, steel wire is wound around the inner layer. By using up to six layers, this form of construction is suitable for high pressures up to 500 bar. In the case of textile reinforced hoses, high-tech synthetic fibres such as aramid provide very good pressure stability. In addition, these hoses are flexible and light and are used in low-pressure applications up to 100 bar.

All hydraulic hoses from the HANSA‑FLEX product range are regularly tested on in-house impulse and burst pressure test benches as part of our quality assurance system. HANSA‑FLEX is also able to test hydraulic hoses and hydraulic hose/fitting combinations made to fulfil the customer’s specific requirements, such as suitability for higher pressures or alternative use scenarios. We also do not disappoint when it comes to availability. As Europe’s biggest hydraulics dealer and system supplier, we can count on our two main warehouses and network of branches to guarantee excellent availability.

Which hydraulic hose lines are most suitable for a specific purpose can be reliably determined only with experience and know-how. The fluid experts from HANSA‑FLEX offer comprehensive advice and are delighted to show you your options for optimisation through material choice and system design. You can contact our teams in any of the HANSA‑FLEX branches around the world. Our field service technicians will also be pleased to meet with you directly on site and advise on the installation of your hydraulic hose lines.

HANSA‑FLEX technicians manufacture preassembled, ready-to-install hydraulic hose lines in accordance with X-CODE data or your samples in over 450 branches throughout Germany. The hoses are professionally crimped, tested and cleaned. The highest quality standards apply to these preassembled hydraulic hose lines. The result is a leak-proof positive connection between the hydraulic hose and the connected fitting, which guarantees safety in use even at high pressures.