Select language

Esc

Assistance and contact

Your direct line to us

Do you have any questions about our services and products? Or do you need help?

Telephone
+36 1 4560499
Immediate service
+36 30 552 6600

Monday - Wednesday

07:30 - 16:00

Thursday

07:30 - 16:00

Friday

07:30 - 16:00

Sundays and public holidays are excluded

Or perhaps not quite so direct?

Sundays and public holidays are excluded

Get in touch with us
Contact options
Help and support directly on site
Locate your nearest branch

Esc

Oil filtration ensures clean fluid and efficient processes

Solid and liquid contaminants cause abrasion, increase wear and promote corrosion. Regular oil filtration ensures your production processes run smoothly and helps avoid damage to equipment, systems and machines. The fluid experts from HANSA‑FLEX perform professional oil cleaning to achieve the desired cleanliness level and find the perfect filter solution for your hydraulic system.

Hansa‑flex fluid service

From hydraulic oil analysis and cleaning right up to fluid-related system optimisation, the experienced fluid experts from HANSA‑FLEX can advise and assist on all matters of fluid management.

  • On the road with experience and a laboratory

    Our fluid specialists take to the road with extensive experience and a mobile laboratory.

  • Certified quality

    Work performed in compliance with the German Water Resources Act (WHG); ISO 9001; ISO 14001 and OHSAS 18001.

  • Professional damage analysis

    We can tell a great deal about the likely damage to hydraulic components from the residues in the oil.

  • Perfect advice

    We advise you on the selection and optimisation of hydraulic systems and fluids.

Why you should carry out regular oil filtering

Prevent machine downtimes and defective components

  • Avoid oil contamination

    Repairs, defective seals or a faulty tank seal can allow dust, and particles of metal or seals to enter the hydraulic system or the oil tank. From there they gradually spread throughout the whole system and damage components such as pumps or valves. The consequences: repairs, failures and long standstills. In addition to regular oil analyses, the selection of the right filter system is extremely important. Whether suction, pressure, return or tank breather filter: there are numerous filtration solutions for a wide range of purposes. HANSA‑FLEX fluid technology experts advise you on their selection, design and installation.

  • Detect oil contamination

    Oils carrying high levels of dirt also carry hidden dangers. Many particles are often invisible to the naked eye. The consequences: even the smallest particles circulating undiscovered inside your system can cause abrasion, wear and corrosion. It is just a matter of time until components appear to suddenly fail. To prevent damage progressing this far, the HANSA‑FLEX fluid specialists analyse the oil on site or in the laboratory. And what if failure has already occurred? As part of damage detection on faulty components such as pumps, motors and hose lines, we make a list of optimisation measures for the hydraulic system, hydraulic and gear oils, which we would be happy to perform for you.

  • Rectify oil contamination

    If foreign material was found from an oil analysis, HANSA‑FLEX Fluid Service can filter the fluid while the system or machine continues to operate. We provide various high-performance filter systems and flushing equipment for hire or purchase. We also design and manufacture flushing units and bypass filter systems individually to suit your specific requirements. These can be a permanent part of your system. Before an oil change and when bringing into first use, our Fluid Service technicians thoroughly flush your system so that no harmful contaminants remain.

  • Prevent oil contamination

    Even fresh oil is not 100 % clean. Residues from production, filling or transport may remain. Levels of contamination may be only slightly better than the specified minimum ISO requirement 21/19/16. This is not adequate for precisely designed hydraulic systems, because even the smallest amount of dirt in the micrometre range can lead to serious problems. Highly-sensitive hydraulic systems in machines and plant engineering equipment require special fluid care. If necessary, the fluid experts from HANSA‑FLEX perform microfiltration of the oil before filling and officially record compliance with the required cleanliness level.

As experts in fluid technology, we have extensive experience in all aspects of hydraulic oils.

As experts in fluid technology, we have extensive experience in all aspects of hydraulic oils.

/

Oil-related services

HANSA‑FLEX Fluid Service carries out oil analyses directly on site, performs oil cleaning or complete oil changes.